HSN code 7616 is the catch-all classification for 'Other Articles of Aluminium' within India's customs tariff. It covers a diverse range of manufactured aluminium goods not specifically classified under earlier headings in Chapter 76 (like bars, rods, profiles, sheets, tubes, pipes) or other Chapters. This HSN is critical for importers, exporters, and procurement teams dealing with miscellaneous aluminium components, wire products, foil, and fasteners. Accurate classification under 7616 ensures correct duty and GST application, avoiding compliance issues. Understanding what falls under 7616 helps buyers source specific aluminium articles and ensures suppliers correctly declare their goods in the Indian market. MetaleMart facilitates sourcing for many related aluminium products, even if some specific 7616 items are niche.
What HSN 7616 Covers
HSN 7616 is designated for 'Other Articles of Aluminium' and acts as a residual category within Chapter 76 of the Indian customs tariff. This heading encompasses a broad spectrum of manufactured goods made primarily from aluminium or its alloys, which are not specifically detailed under preceding HSN codes like bars, rods, profiles (7604), wire (7605), plates, sheets, strip (7606), foil (7607), tubes, pipes (7608), or structural shapes (7609, 7610). Key inclusions under HSN 7616 typically involve:- Aluminium foil with a thickness not exceeding 0.2 mm.
- Aluminium wire cloth, similar woven or knitted fabric.
- Manufactured articles such as rivets, washers, gaskets, and certain types of fasteners (screws, nuts) made of aluminium.
- Aluminium powders and flakes (though powders may also fall under specific chemical codes).
- Cast or pressed aluminium articles not elsewhere specified.
- Other fabricated items like aluminium coils used for further processing, certain types of aluminium handles, or small decorative aluminium components.
Common Materials & Grades
- Aluminium Foil (Thickness < 0.2mm): Used extensively in packaging, insulation, and industrial applications.
- Aluminium Wire Cloth / Mesh: For screens, filters, fencing, and sieves.
- Aluminium Rivets: Non-threaded fasteners used to join materials.
- Aluminium Washers: Used to distribute load and prevent surface damage.
- Aluminium Gaskets: Sealing components used in engines and industrial equipment.
- Aluminium Wire (various alloys): For general manufacturing, electrical applications, or specific components.
- Aluminium Angles & Channels: Depending on finish and specific use, some smaller or specialised sections might fall here if not covered by 7609/7610.
- Aluminium Fasteners (Screws, Nuts): General-purpose fasteners not requiring higher strength alloys classification elsewhere.
Trade Names & Synonyms
- Aluminium Foil (< 0.2mm)
- Alu Mesh / Wire Netting
- Aluminium Fasteners
- Aluminium Pressings
- Aluminium Stampings
- Aluminium Wire Cloth
- General Aluminium Parts
- Alu Components
Typical Industrial Uses
- Packaging: Aluminium foil for food wrapping, pharmaceutical blister packs, and industrial bundling.
- Filtration & Screening: Aluminium wire cloth used in sieves, filters, and protective screens.
- Construction: Miscellaneous aluminium components, gaskets, or small fittings.
- Automotive: Aluminium gaskets, washers, and certain types of fasteners.
- Electronics: Aluminium foil for insulation, shielding, or components.
- General Manufacturing: Various small aluminium parts, rivets, and hardware.
- Aerospace: Specific aluminium components and foil applications where weight and conductivity are key.
- Chemical Industry: Foil and mesh for containment or separation processes.
GST Rate (Indicative)
Products under HSN 7616, which covers 'Other Articles of Aluminium', typically fall into the 18% GST slab. However, specific items like aluminium foil might have different rates. It is essential to verify the exact GST rate applicable to your specific aluminium product on the official CBIC portal, as classifications and rates can change.
Related HSN Codes
- HSN 7601: Aluminium and aluminium articles, unwrought. (Basic form)
- HSN 7606: Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm. (Thicker flat forms)
- HSN 7607: Aluminium foil (whether or not printed or backed or further prepared or of an extent of 0.2 mm or less). (Specific foil classification)
- HSN 7612: Aluminium casks, boxes, tanks, etc. (Larger containers)
- HSN 7615: Table, kitchen, other household articles & parts. (Consumer goods)
- HSN 8307: Flexible tubing of base metal (incl. Aluminium). (Specific flexible tubes)
Related on MetaleMart
Frequently Asked Questions about HSN 7616
What specific types of small aluminium parts are classified under HSN 7616?
HSN 7616 covers a wide array of miscellaneous aluminium articles not specified elsewhere. This includes items like aluminium foil (below 0.2mm thickness), wire cloth, gaskets, washers, rivets, and manufactured goods. If your aluminium product doesn't fit into a more specific HSN code within Chapter 76 (like bars, rods, profiles, sheets, plates, tubes, pipes) or other chapters, it likely falls under 7616. Always verify with your CHA or tax advisor for precise classification.
Does HSN 7616 cover aluminium foil?
Yes, aluminium foil with a thickness less than 0.20 mm is classified under HSN 7616. Thicker foils or sheets would fall under HSN 7607. This distinction is crucial for correct customs duty and GST assessment in India. Procurement teams should carefully check the specifications of aluminium foil to ensure correct HSN application.
Is manufactured aluminium under HSN 7616?
HSN 7616 covers manufactured articles of aluminium. This means items that have undergone some form of processing or assembly beyond basic forms like ingots or unwrought blocks. For instance, simple aluminium castings might fall under specific casting codes, but intricately manufactured aluminium components, wire mesh, or even certain types of rivets and washers would be classified under 7616, provided they aren't specific to another HSN.
What about aluminium fasteners and hardware under HSN 7616?
Generally, HSN 7616 covers 'Other Articles of Aluminium'. If you are importing or procuring aluminium fasteners like rivets, screws, nuts, or washers that are not specifically covered under other headings (e.g., those meant for specific machinery), they would likely fall under 7616. Always confirm with customs documentation and your CHA, as specific product designs might alter classification.