HSN Chapter 76 encompasses all forms of aluminium and its manufactured articles, a critical category for Indian industrial procurement. This chapter is vital for buyers sourcing raw materials, semi-finished goods, and specific aluminium components. From unwrought aluminium used in Foundries to high-performance aluminium sheets and profiles for aerospace and automotive industries, HSN 76 covers a vast spectrum. Understanding this code is crucial for accurate customs classification, GST compliance, and efficient supply chain management in India, ensuring that businesses can source the right aluminium products for applications ranging from construction and packaging to electronics and transportation. MetaleMart provides access to a wide range of aluminium grades and shapes falling under this HSN.
What HSN 76 Covers
HSN Chapter 76 is dedicated to Aluminium and articles thereof. This comprehensive chapter includes unwrought aluminium (ingots, billets, etc.), aluminium waste and scrap, and importantly, semi-finished products. These semi-finished goods cover a wide array, including plates, sheets, and foil (whether or not printed, coated, or backed) typically up to 0.2 mm thickness for foil and beyond for sheets/plates. It also encompasses bars, rods, and profiles of aluminium, as well as wire. Hollow profiles, tubes, pipes, and fittings made from aluminium are also classified under HSN 76. Furthermore, the chapter extends to finished articles of aluminium, such as structures (like bridges, towers, and roof trusses), prefabricated buildings of aluminium, mobile homes, and various containers like gas cylinders and cans. It also covers other manufactured articles like tableware, cables, and aluminium powders and flakes. Key exclusions often involve goods where aluminium is a minor component or where specific material chapters take precedence (e.g., aluminium-clad steel). Confusion can arise with HSN Chapter 73 (Articles of Iron/Steel) or Chapter 74 (Copper), necessitating careful examination of the base material to confirm classification under HSN 76.Common Materials & Grades
- Aluminium Plate: Available in various alloys like 5083, 6061, 7075 (for marine, structural, and aerospace applications).
- Aluminium Sheet: Commonly in grades 1100, 3003, 5052 (for general engineering, decorative, and packaging uses).
- Aluminium Bar/Rod: Often in 6061, 6063, 2011 alloys (for machining, construction profiles, and automotive parts).
- Aluminium Extrusion/Profile: Typically in 6060, 6063 alloys (for windows, doors, structural framing, heat sinks).
- Aluminium Tube/Pipe: Grades like 6061, 6063 (for fluid transport, structural components, bicycle frames).
- Aluminium Foil: Often pure aluminium or alloys like 1235, 8011 (for packaging, insulation, capacitors).
- Aluminium Wire: Grades like 1350, 5056 (for electrical conductors, welding, fasteners).
- Unwrought Aluminium: Ingots and billets for further processing.
Trade Names & Synonyms
- Alu
- Aluminium Metal
- Aluminium Sections
- Hindalco Aluminium (Brand)
- NALCO Aluminium (Brand)
- Aluminium Ingots
- Aluminium Coils
- Aluminium Profiles
Typical Industrial Uses
- Aerospace: Aircraft frames, fuselage components, wings.
- Automotive: Engine parts, body panels, wheels, heat exchangers.
- Construction: Window/door frames, curtain walls, roofing, structural elements.
- Packaging: Food & beverage cans, foil wraps, pharmaceutical packaging.
- Electronics: Heat sinks, casings, electrical conductors, cable sheathing.
- Marine: Boat hulls, marine hardware (especially corrosion-resistant alloys).
- Consumer Goods: Cookware, furniture, appliances.
- Transportation: High-speed rail components, truck bodies, trailers.
GST Rate (Indicative)
HSN Chapter 76 covers Aluminium and articles thereof. Most products within this chapter, especially semi-finished and finished goods like sheets, plates, pipes, and bars, fall under the 18% GST slab. However, specific rates can vary based on product type and end-use. Always verify the exact GST rate on the official CBIC portal.
Related HSN Codes
- HSN 72: Covers Iron and Steel products.
- HSN 73: Covers Articles of Iron or Steel.
- HSN 74: Covers Copper and articles thereof.
- HSN 75: Covers Nickel and articles thereof.
- HSN 83: Covers Miscellaneous articles of base metal.
Related on MetaleMart
Frequently Asked Questions about HSN 76
What kind of products fall under HSN 76 in India?
HSN 76 covers unwrought aluminium, semi-finished products like plates, sheets, foil, bars, rods, profiles, wire, tubes, pipes, and hollow profiles of aluminium, as well as finished articles like structures, containers, and closures. The specific GST rate depends on the exact product and its end-use, typically falling within the 18% slab. Always verify with the latest GST notifications.
Can you give examples of what HSN 76 includes and excludes?
HSN 76 covers a vast range of aluminium products, from basic unwrought forms to complex finished articles. This includes aluminium plates, sheets, foil, bars, rods, profiles, wires, tubes, pipes, and even specific aluminium-based manufactures like cable cars and structures. GST rates vary, but 18% is common for many semi-finished and finished goods. Consult the CBIC for precise rates.
What are common search terms and queries related to HSN 76?
Common search terms include 'aluminium plate HSN 76', 'aluminium sheet GST', 'HSN code for aluminium wire', 'aluminium extrusion HSN', and 'aluminium foil HSN'. Buyers also search for specific alloys like 'AA6061 HSN 76' or 'aluminium grade 5083 HSN 76'. Accountants and CHAs look for 'HSN 76 GST rate' and 'customs duty on aluminium products'.
What types of aluminium products does MetaleMart offer under HSN 76, and what are typical supplier notes?
MetaleMart offers a wide selection of aluminium products under HSN 76, including various forms like sheets, plates, bars, rods, pipes, and tubes in grades such as AA1100, AA3003, AA5052, AA6061, and AA7075. We cater to industrial requirements for both semi-finished and some standard finished aluminium articles. Minimum Order Quantities (MOQs) can vary from a few kilograms for custom orders to standard mill quantities for bulk purchases. Typical supplier notes might mention adherence to international standards like ASTM or EN.