HSN code 7402 covers 'Unrefined Copper; Copper Anodes for Electrolytic Refining' within India's Customs Tariff. This heading is fundamental for the primary stages of copper production and processing. It includes copper in its least processed forms prior to refinement through electrolytic methods, alongside the anodes specifically designed for this process. Businesses involved in copper smelting, refining, and trading of raw copper materials will engage with HSN 7402. Understanding this code is crucial for accurate customs classification, import/export documentation, and GST compliance for these initial copper commodities. It forms the bedrock for subsequent copper product classifications under Chapter 74 of the HSN system.
What HSN 7402 Covers
HSN code 7402 specifically governs the trade of 'Unrefined Copper' and 'Copper Anodes for Electrolytic Refining' in India. This includes copper metal in its rawest forms, such as ingots or blisters, which have undergone initial smelting but not yet the final purification processes like electrolytic refining. It also explicitly includes copper anodes, which are essential components used in electrolytic cells to facilitate the refining of impure copper into high-purity cathodes. These anodes are themselves typically made of copper but are designated for the refining process. Crucially, HSN 7402 *excludes* refined copper cathodes (classified under HSN 7403), copper alloys in various forms (also under 7403), and manufactured copper articles or products (covered in later HSN codes of Chapter 74). It also does not cover copper waste and scrap (HSN 7404) or master alloys (HSN 7405). Buyers and sellers must distinguish between unrefined material destined for refining (7402) and the refined output (7403) to ensure correct customs declarations and GST assessments.Common Materials & Grades under HSN 7402
- Unrefined Copper Ingots: Primary copper cast into large blocks, often with impurities, awaiting further refining.
- Copper Anodes: Large, flat pieces of relatively impure copper used as the positive electrode in electrolytic refining processes to produce high-purity copper cathodes.
- Copper Precipitate: Copper compounds obtained from solutions, typically requiring further processing, falling under the 'unrefined' category.
Trade Names & Synonyms for HSN 7402
- Blister Copper
- Anode Copper
- Unrefined Copper Ingots
- Copper Precipitate (raw)
- Electrolytic Anodes
Typical Industrial Uses for HSN 7402 Materials
- Electrolytic Refining Feedstock
- Primary Copper Production
- Smelter Output
- Raw Material for Copper Cathode Manufacturing
- Anodes for Electroplating Baths (less common, primary use is refining)
GST Rate (Indicative)
Products under HSN 7402, typically unrefined copper and anodes, generally fall under the 18% GST slab in India. However, rates can vary based on specific product forms and amendments. Buyers and sellers should always verify the applicable GST rate on the official CBIC portal.
Related HSN Codes
- 7401: Copper mattes; cement copper (precipitated copper)
- 7403: Refined copper and copper alloys, wrought
- 7404: Copper and copper alloy waste and scrap
- 7405: Master alloys of copper
Related on MetaleMart
Frequently Asked Questions about HSN 7402
What is the difference between HSN 7402 and HSN 7403?
HSN 7402 covers basic unrefined copper forms and copper anodes meant for electrolytic refining. It does not cover refined copper cathodes or other processed copper shapes like wires, tubes, or bars, which fall under different HSN codes. Always verify the exact form and purity against the customs tariff.
Does HSN 7402 cover refined copper cathodes?
HSN 7402 is specifically for unrefined copper and anodes for electrolytic refining. Refined copper cathodes, which are the primary output of electrolytic refining, are classified under HSN 7403.11. Buyers seeking refined copper for manufacturing should look for codes under 7403.
Who typically buys materials classified under HSN 7402?
HSN 7402 applies to the very initial stages of copper, specifically its unrefined forms or anodes for the refining process. It's crucial for smelters, refiners, and traders dealing with primary copper materials. Buyers of manufactured copper goods will typically look at later HSN codes.
Can I find refined copper cathodes or copper alloys on MetaleMart under HSN 7402?
While MetaleMart focuses on refined and fabricated metal products (like bars, sheets, pipes in various copper alloys), HSN 7402 pertains to the raw, unrefined copper or anodes before the main refining process. If you need refined copper cathodes or alloys for manufacturing, explore HSN 7403 and subsequent codes.