HSN code 7222 in India pertains to 'Other bars and rods of stainless steel, angles, shapes and sections of stainless steel.' This heading is crucial for procurement teams, accountants, and customs agents dealing with a wide array of stainless steel long products that aren't covered under other specific stainless steel categories. Understanding HSN 7222 ensures accurate customs declaration, GST compliance, and efficient sourcing. It differentiates these specific stainless steel forms from flat-rolled products or semi-finished items. MetaleMart provides a comprehensive catalog of stainless steel items falling under this HSN code, connecting buyers with reliable suppliers across India. This classification is vital for industries requiring corrosion-resistant, high-strength components for manufacturing and construction.
What HSN 7222 Covers
HSN code 7222 specifically covers a range of stainless steel long products that are not flat-rolled or wire forms. This includes solid bars and rods, which are the foundational elements for many machined parts and structural components. It also encompasses angles, shapes, and sections – think of L-beams, U-channels, T-sections, and other custom profiles made from stainless steel. These are vital for constructing frameworks, supports, and specialised equipment where corrosion resistance is paramount. Products under HSN 7222 typically possess a length greater than their width and thickness, distinguishing them from plates or sheets. Common stainless steel grades like 304, 316, 410, and 430, in various finishes (e.g., pickled, polished), fall under this code when presented in bar, rod, or shaped section forms. Exclusions from 7222 include stainless steel wire (HSN 7223), flat-rolled products like sheets and plates (covered under 7219), and semi-finished stainless steel products (HSN 7218). Proper classification ensures accurate duty assessment and GST application for these essential engineering materials.Common Materials & Grades (HSN 7222)
- 304/304L Stainless Steel Bars: Widely used for general-purpose applications requiring good corrosion resistance. Available in round, square, and hex shapes.
- 316/316L Stainless Steel Rods: Offers superior corrosion resistance, especially against chlorides, making it ideal for marine and chemical environments.
- 410 Stainless Steel Angles: Martensitic stainless steel used for applications requiring moderate corrosion resistance and higher strength.
- 430 Stainless Steel Sections: Ferritic stainless steel, good for decorative applications and offering reasonable corrosion resistance.
- Duplex Stainless Steel Bars: High strength and corrosion resistance, often used in demanding offshore and chemical processing industries.
- Precipitation Hardening (PH) Stainless Steel Bars (e.g., 17-4 PH): Offers a combination of high strength and corrosion resistance, suitable for aerospace and specialised components.
- Stainless Steel Flat Bars (e.g., SS 316 Flat Bar): Used for structural components, brackets, and decorative elements.
- Stainless Steel Square Bars (e.g., SS 304 Square Bar): Common in fabrication, machine parts, and architectural elements.
Trade Names & Synonyms (HSN 7222)
- SS Bars & Rods
- Stainless Sections
- Stainless Angles
- SS Shapes
- Stainless Steel Long Products
- 304/316 Bars
- Stainless Steel Structural Sections
- Round/Hex/Square SS Bars
Typical Industrial Uses (HSN 7222)
- Chemical & Petrochemical Plant Construction
- Food & Beverage Processing Equipment Fabrication
- Pharmaceutical Machinery Components
- Marine Hardware & Structures
- Automotive Shafts & Fasteners
- Architectural Elements & Trim
- Surgical & Medical Instrument Components
- Fasteners (Bolts, Nuts, Screws)
GST Rate (Indicative)
Products classified under HSN 7222, which include various stainless steel bars, rods, angles, shapes, and sections, typically fall within the 18% GST slab. However, specific rates can vary based on product intricacies and amendments by the CBIC. Buyers are advised to verify the exact GST rate on the official CBIC portal or consult with a tax professional.
Related HSN Codes
- HSN 7218: Other forms of stainless steel (semi-finished, ingots, etc.).
- HSN 7215: Other bars and rods of iron or non-alloy steel.
- HSN 7223: Stainless steel wire.
- HSN 7228: Other bars, rods, angles, shapes and sections, of other steel; hollow drill bars and rods, of alloy or non-alloy steel.
Related on MetaleMart
- Parent: HSN 72 — Iron and steel
- HSN 7201 — PIG IRON AND SPIEGELEISEN IN PIGS, BLOCKS OR OTHER PRIMARY F
- HSN 7202 — FERRO-ALLOYS
- HSN 7203 — FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE AN
- HSN 7204 — FERROUS WASTE AND SCRAP; REMELTING SCRAP INGOTS OF IRON OR S
- Browse all HSN codes
- Metal Grades Library
- Shop industrial metals
Frequently Asked Questions about HSN 7222
Is GST applicable to products classified under HSN 7222?
Yes, stainless steel bars, rods, angles, shapes, and sections under HSN 7222 are subject to GST. The typical GST rate band is 18%, but it's crucial to verify the exact rate applicable to your specific product and transaction with the Central Board of Indirect Taxes and Customs (CBIC) or consult your tax advisor. MetaleMart facilitates transactions with suppliers who comply with GST regulations.
What's the difference between HSN 7222 and HSN 7218?
HSN 7222 covers various stainless steel long products like bars, rods, angles, and shaped sections. HSN 7218 covers other stainless steel products, typically semi-finished or flat-rolled forms. For specific product classifications, especially concerning cut lengths or specific shapes, always refer to the official Customs Tariff Act or consult a Customs House Agent.
What are common industrial applications for stainless steel under HSN 7222?
Stainless steel bars and rods under HSN 7222 are used in various demanding applications like chemical processing equipment, food processing machinery, surgical instruments, and automotive parts due to their corrosion resistance and strength. MetaleMart lists suppliers offering these grades in multiple specifications.
How does HSN 7222 differ from HSN 7215?
The primary difference is the material: HSN 7222 specifically deals with stainless steel long products. HSN 7215 covers bars and rods of *other* iron and non-alloy steel. Buyers seeking corrosion resistance and high-performance applications would look for HSN 7222 products. Always check the material grade and the official HSN description to ensure correct classification.