HSN code 7220 covers critical flat-rolled stainless steel products with a width of less than 600 mm, essential for various manufacturing sectors in India. This heading specifically targets stainless steel strips and sheets that are narrower than standard mill widths, often used for precision components, specialized fabrication, and smaller-scale industrial applications. Procurement teams, accountants, and customs agents frequently search for HSN 7220 when sourcing materials for industries ranging from automotive and aerospace to electronics and consumer goods. Understanding this classification is vital for accurate customs declarations, GST compliance, and efficient inventory management of specialized stainless steel forms. Navigating MetaleMart's catalog under this HSN ensures access to a wide array of stainless steel options meeting stringent quality standards.
What HSN 7220 Covers
HSN code 7220 specifically pertains to flat-rolled products of stainless steel with a width less than 600 mm. This category encompasses a variety of forms, primarily including stainless steel strips and sheets that do not meet the minimum width requirement of 600 mm for classification under other headings (like 7219). The code covers products that are either pickled or not pickled, in plain or patterned finishes, cold-rolled or hot-rolled, and can be supplied in coils or cut-to-length pieces. It's crucial for Indian buyers and customs agents to note that HSN 7220 strictly applies only to stainless steel; flat-rolled products of non-alloy steel or other alloy steels with similar widths are classified under different HSN codes (e.g., 7211 or 7221, respectively).
Key inclusions under HSN 7220:
- Stainless steel strips (slit from wider coils).
- Narrow stainless steel sheets.
- Stainless steel foils below 600mm width.
Exclusions from HSN 7220:
- Flat-rolled stainless steel products with a width of 600 mm or more (classified under HSN 7219).
- Flat-rolled products of non-alloy steel (classified under HSN 7211).
- Flat-rolled products of other alloy steels (classified under HSN 7221 if width < 600mm, or 7227 if width >= 600mm).
- Bars, rods, and wire forms, even if made of stainless steel.
Accurate classification under HSN 7220 ensures correct duty calculation and GST application for specialized stainless steel requirements in India.
Common Materials & Grades
- Stainless Steel 304 (1.4301): A versatile and widely used grade, often supplied as strips or narrow sheets in HSN 7220 for general fabrication.
- Stainless Steel 316 (1.4401): Known for its enhanced corrosion resistance, supplied in forms under HSN 7220 for marine or chemical applications.
- Stainless Steel 430 (1.4016): A ferritic stainless steel, commonly available as narrow coils or strips under HSN 7220 for decorative or appliance trims.
- Stainless Steel 202 (1.4373): An economical austenitic stainless steel, often found as strips and sheets in HSN 7220 for cost-sensitive applications.
- Stainless Steel Strips: Available in various widths below 600mm, cut from wider coils, and falling under HSN 7220.
- Stainless Steel Sheets (Narrow): Precision-cut sheets with widths less than 600mm, classified under HSN 7220.
- Stainless Steel Foils: Very thin gauge materials, often supplied in narrow widths, specified under HSN 7220.
Trade Names & Synonyms
- Stainless Steel Narrow Strips
- SS Strips < 600mm
- SS Sheets < 600mm Width
- Cold Rolled Stainless Steel Strips
- Hot Rolled Stainless Steel Strips
- Precision Stainless Strips
- SS Foil < 600mm
- Stainless Steel Cut Lengths (<600mm)
Typical Industrial Uses
- Automotive Components: For trim, detailing, and specialized parts where narrow widths are required.
- Electronics Manufacturing: Used in casings, components, and shielding for electronic devices.
- Appliance Manufacturing: For decorative elements, trims, and functional parts in home appliances.
- Cutlery & Kitchenware: Manufacturing of specialized high-end kitchen tools and serving items.
- Medical Devices: Precision components and instruments requiring specific stainless steel properties.
- Small Fabricated Parts: General manufacturing of small, intricate metal components.
- Jewellery & Watchmaking: As raw material for watch bands, cases, and decorative jewellery elements.
- Industrial Instrumentation: Housings and components for sensitive measuring and control equipment.
GST Rate (Indicative)
Products classified under HSN 7220 typically fall under the 18% GST slab. This rate applies generally to stainless steel flat-rolled products. However, it is crucial to verify the exact GST rate on the official CBIC portal as variations may exist based on specific sub-classifications or alloys.
Related HSN Codes
- 7209: Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more.
- 7211: Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm.
- 7219: Stainless steel flat-rolled products, of a width of 600 mm or more.
- 7221: Flat-rolled products of other alloy steel, of a width of less than 600 mm.
- 7227: Flat-rolled products of other alloy steel, of a width of 600 mm or more.
Related on MetaleMart
- Parent: HSN 72 — Iron and steel
- HSN 7201 — PIG IRON AND SPIEGELEISEN IN PIGS, BLOCKS OR OTHER PRIMARY F
- HSN 7202 — FERRO-ALLOYS
- HSN 7203 — FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE AN
- HSN 7204 — FERROUS WASTE AND SCRAP; REMELTING SCRAP INGOTS OF IRON OR S
- Browse all HSN codes
- Metal Grades Library
- Shop industrial metals
Frequently Asked Questions about HSN 7220
What specific types of stainless steel products fall under HSN 7220?
HSN 7220 covers flat-rolled stainless steel products less than 600mm wide. This includes strips and sheets. HS codes 7220.11 and 7220.12 are for non-alloy steel, while 7220.90 covers other products including stainless steel strips and sheets. Verify specific product applicability with your supplier and CHA.
What is excluded from HSN 7220?
HSN 7220 applies to flat-rolled stainless steel products with a width under 600mm. This specifically excludes wider coils or plates classified under other HSN codes (like 7209, 7211, 7212 for non-alloy, or 7219, 7220 for stainless). Always check the width and material specification against the HSN code.
What is the GST rate for HSN 7220 products?
The typical GST rate band for HSN 7220 is 18%. However, this can vary based on specific product type and composition (e.g., alloy content). Always verify the exact GST rate on the official CBIC portal or consult your tax advisor before making a purchase.
Which stainless steel grades are commonly found under HSN 7220?
For HSN 7220, common stainless steel grades include 304 (1.4301), 316 (1.4401), 430 (1.4016), and 202 (1.4373). These are typically available as strips, sheets, and foils in various finishes. MetaleMart offers these in multiple dimensions suitable for diverse industrial applications.