HSN code 7219 is crucial for the trade of flat-rolled stainless steel products with a width of 600 mm or more in India. This category encompasses a wide range of stainless steel sheets, plates, and coils vital for numerous manufacturing and construction sectors. Accurate classification under HSN 7219 ensures correct GST application and smooth customs clearance, impacting procurement costs and supply chain efficiency for businesses trading these base metals. Buyers, sellers, and customs agents rely on this HSN code for precise identification and compliance within the Indian B2B industrial metals market. MetaleMart provides access to various stainless steel grades fitting this description.
What HSN 7219 Covers
HSN 7219 specifically deals with flat-rolled products of stainless steel where the width is 600 mm or more. This broad category includes items in various finishes, such as hot-rolled, cold-rolled (often referred to as mill-rolled), and clad forms. The key defining characteristic for classification under HSN 7219 is the minimum width of 600 mm. Products meeting this width criterion, irrespective of their thickness (provided they are considered 'flat-rolled'), fall under this heading. This includes essential materials like stainless steel sheets, plates, and coils traded extensively in the Indian market for industrial applications. Exclusions from HSN 7219 primarily involve stainless steel products narrower than 600 mm, which are typically classified under HSN 7220, and certain other categories like bars, rods, and structural shapes. Misclassification can occur if the width criterion is overlooked, especially when comparing with sibling HSNs like 7220 or chapter headings covering different steel types. Precise adherence to the 600 mm width specification is paramount for correct HSN 7219 classification.Common Materials & Grades for HSN 7219
- SS 304 / 304L: Widely used general-purpose stainless steel, known for corrosion resistance. (Sheets, Plates, Coils >= 600mm width)
- SS 316 / 316L: Enhanced corrosion resistance, especially against chlorides, used in marine and chemical industries. (Sheets, Plates, Coils >= 600mm width)
- SS 430: A plain chromium stainless steel, offering good corrosion resistance and formability. (Sheets, Plates, Coils >= 600mm width)
- SS 410: Martensitic stainless steel, known for hardness and strength, often used in cutlery and hardware. (Sheets, Plates, Coils >= 600mm width)
- SS 202: An economical alternative to SS 304, offering good strength and corrosion resistance. (Sheets, Plates, Coils >= 600mm width)
- SS 310: High chromium and nickel content, offering excellent resistance to high temperatures. (Sheets, Plates, Coils >= 600mm width)
Trade Names & Synonyms for HSN 7219
- Stainless Steel Plates
- Stainless Steel Sheets
- Stainless Steel Coils
- SS Wide Plates
- SS Mill Plate
- SS Hot Rolled Plate
- SS Cold Rolled Coil
- SS 600mm+ Width Profile
Typical Industrial Uses for HSN 7219
- Chemical and Petrochemical Industry (Tanks, Vessels, Piping)
- Food Processing Equipment
- Automotive Components
- Architectural and Construction (Cladding, Roofing, Structural elements)
- Kitchenware and Appliances
- Medical Equipment and Surgical Instruments
- Heat Exchangers and Boilers
- General Fabrication and Manufacturing
GST Rate (Indicative)
Products classified under HSN 7219 typically fall within the 18% GST slab. However, specific item configurations or end-uses might vary. Always verify the applicable GST rate on the official CBIC portal before finalizing any transaction under HSN 7219.
Related HSN Codes
- HSN 7208: Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more.
- HSN 7209: Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm.
- HSN 7211: Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm.
- HSN 7220: Flat-rolled products of stainless steel, of a width of less than 600 mm.
- HSN 7225: Flat-rolled products of other stainless steels, of a width of 600 mm or more.
Related on MetaleMart
- Parent: HSN 72 — Iron and steel
- HSN 7201 — PIG IRON AND SPIEGELEISEN IN PIGS, BLOCKS OR OTHER PRIMARY F
- HSN 7202 — FERRO-ALLOYS
- HSN 7203 — FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE AN
- HSN 7204 — FERROUS WASTE AND SCRAP; REMELTING SCRAP INGOTS OF IRON OR S
- Browse all HSN codes
- Metal Grades Library
- Shop industrial metals
Frequently Asked Questions about HSN 7219
What is the typical GST rate for HSN 7219?
HSN 7219 primarily covers flat-rolled stainless steel products with a width of 600 mm or more. Common forms include sheets, plates, and coils. Transactions under this code typically fall into the 18% GST slab. Verify the exact rate on the CBIC portal.
What kind of products are covered under HSN 7219?
HSN 7219 applies to flat-rolled stainless steel products that are 600 mm or wider. This includes materials like SS 304, SS 316, SS 430, and others, traded in forms such as sheets, plates, and coils for industrial applications, usually attracting an 18% GST.
How is HSN 7219 different from other flat-rolled stainless steel HSNs?
The core distinction for HSN 7219 is the width: 600 mm or more. Products narrower than this, even if otherwise stainless steel flat-rolled items, would fall under different HSN codes (e.g., 7220). Precision in measuring width is key for correct classification for HSN 7219.
What are the common forms of stainless steel traded under HSN 7219?
Common forms under HSN 7219 include sheets, plates, and coils of stainless steel. MetaleMart lists various stainless steel grades like SS 304, SS 316, SS 430, and SS 410 in these flat-rolled forms, all complying with the 600 mm width requirement for HSN 7219.