HSN code 7210 in India pertains to 'Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated'. This heading is crucial for procurement teams, accountants, and customs agents dealing with a wide array of steel products used in construction, automotive, and manufacturing sectors. These are typically steel sheets, strips, or coils that have undergone significant post-production treatment, such as galvanising (zinc coating), tin-plating, or painting, to enhance corrosion resistance or improve aesthetics. Understanding HSN 7210 is vital for correct customs declarations, accurate GST (18% is common) calculation, and efficient inventory management. MetaleMart's catalog features various grades of steel coils and sheets that fall under this classification, ensuring buyers can source precisely coated materials.
What HSN 7210 Covers
HSN code 7210 specifically applies to flat-rolled products made from iron or non-alloy steel that meet two primary conditions: their width must be 600 mm or more, and they must be clad, plated, or coated. This category encompasses a broad range of finished steel products where a protective or decorative layer has been applied to the base iron or non-alloy steel. Common plating or coating materials include zinc (galvanizing - hot-dip or electro-galvanized), tin (tin-plating), chromium, nickel, paint, lacquers, or plastic layers.
Examples include hot-dip galvanized steel coils used extensively in construction for roofing and structural components, pre-painted galvanized iron (PPGI) sheets providing both protection and aesthetics, and tin-plated steel sheets vital for the packaging industry (food cans). The "clad" aspect refers to composite materials where layers of different metals are bonded together.
Exclusions: Products made from alloy steel or stainless steel are not covered under HSN 7210 and fall into different chapters (e.g., HSN 7219 for stainless steel flat-rolled products). Similarly, flat-rolled products with a width less than 600 mm are classified under HSN 7212. Uncoated flat-rolled products of 600 mm width or more fall under HSN 7209.
Common Materials & Grades
- Hot-dip Galvanised Steel Coils/Sheets (e.g., SGCC, JIS G3302): Steel coated with zinc via a hot-dip process for superior corrosion resistance, widely used in construction and appliances.
- Electro-galvanised Steel Coils/Sheets (e.g., SECC, JIS G3313): Electrolytically coated with zinc, offering a more uniform and often brighter finish than hot-dip, suitable for automotive parts and general fabrication.
- Tin-plated Steel Sheets/Coils (e.g., Commercial Grade): Steel coated with tin, primarily used for food and beverage cans due to its non-toxicity and solderability.
- Pre-painted Galvanised Iron (PPGI) / Pre-painted Steel Coils (e.g., RAL series): Steel coated with layers of paint or polymer over a galvanised base, providing both protection and colour for roofing, cladding, and decorative applications.
- Chrome-plated or Chromium-coated Steel Coils: Steel treated with chromium for enhanced hardness, corrosion resistance, and a bright finish, used in decorative and some industrial applications.
- Plastic-coated Steel Coils/Sheets: Steel with an added layer of plastic for specific protective or decorative properties, used in applications requiring enhanced durability or specific surface textures.
Trade Names & Synonyms
- Galvanised Iron (GI) Sheets/Coils
- Galvalume Sheets/Coils (Often falls under 7210 if width >= 600mm & coated)
- Pre-painted Galvanised Iron (PPGI)
- Pre-painted Steel (PPS)
- Tin Plate
- Tala (Tin Plate)
- Colour Coated Steel
- Zinc Coated Steel
- EGI (Electro-Galvanised Iron) Sheets/Coils
- GI/GC Sheets (Galvanised Corrugated / Galvanised Commercial)
Typical Industrial Uses
- Construction: Roofing sheets, wall cladding, structural components, purlins, gutters, ducting.
- Automotive: Car body panels, chassis components, underbody protection (especially galvanized and pre-painted types).
- Appliances: Refrigerator panels, washing machine bodies, air conditioner casings, microwave ovens.
- Packaging: Food and beverage cans, general line cans (tin-plated steel).
- General Manufacturing: Fabrication of enclosures, machinery parts, metal furniture, lighting fixtures.
- Signage: Outdoor and indoor signs requiring weather resistance and a printable surface.
- Electrical Equipment: Housings for switchgear, electrical panels, and control cabinets.
GST Rate (Indicative)
Products classified under HSN 7210, such as flat-rolled iron or non-alloy steel that is plated or coated, typically fall within the 18% GST slab. However, specific rates can vary based on the exact type and coating. Always verify the current applicable GST rate on the official CBIC portal before making any purchase decisions.
Related HSN Codes
- 7209: Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, simply hot-rolled or cold-rolled (uncoated).
- 7211: Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm.
- 7212: Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated.
- 7213: Iron or non-alloy steel wire rod, hot-rolled.
- 7214: Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded.
- 7215: Other bars and rods of iron or non-alloy steel.
Related on MetaleMart
- Parent: HSN 72 — Iron and steel
- HSN 7201 — PIG IRON AND SPIEGELEISEN IN PIGS, BLOCKS OR OTHER PRIMARY F
- HSN 7202 — FERRO-ALLOYS
- HSN 7203 — FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE AN
- HSN 7204 — FERROUS WASTE AND SCRAP; REMELTING SCRAP INGOTS OF IRON OR S
- Browse all HSN codes
- Metal Grades Library
- Shop industrial metals
Frequently Asked Questions about HSN 7210
Does HSN 7210 cover steel that is galvanized, tinned, or plastic-coated?
Yes, iron or non-alloy steel flat-rolled products under HSN 7210, whether clad, plated, or coated with materials like zinc, tin, chromium, or paint, are covered. The key criteria are the material (iron/non-alloy steel), form (flat-rolled), and width (>= 600 mm). Different coatings and claddings determine specific sub-classifications but remain within the 7210 heading. Check specific sub-headings for precise GST.
What exactly is covered under HSN 7210?
HSN 7210 primarily covers flat-rolled products of iron or non-alloy steel with a width of 600 mm or more. This includes items that are clad, plated, or coated. For example, galvanised steel sheets (coated with zinc) or tin-plated steel sheets fall under this code if they meet the width requirement. The coating or cladding is a specific characteristic defining these products within the broader steel category.
What is NOT covered by HSN 7210?
While HSN 7210 covers flat-rolled iron and non-alloy steel products of 600 mm width or more that are clad, plated, or coated, it generally excludes products made from alloy steel or stainless steel. These typically fall under different HSN headings (e.g., 7219 for stainless or 7225 for other alloy steels). Also, flat-rolled products narrower than 600 mm are classified elsewhere, often under 7209 or 7211.
What are the typical manufacturing processes and forms for products under HSN 7210?
Flat-rolled products under HSN 7210 are manufactured using processes like 'hot-rolling' followed by coating/plating (e.g., galvanising, tin-plating, painting) or 'cold-rolling' followed by coating/plating. The width must be 600 mm or more. Common forms include coils, sheets, and strips. The specific coating (like zinc, tin, chromium, paint, or plastic layers) is a key characteristic. For example, hot-dip galvanized coils or electro-galvanized sheets fit this description.